AE20218 Milliohm Meter Kit, 0.1 Milliohm Resolution, Four Wire Measurement

Description

ASCEL ELECTRONIC
AE20218 Milliohm Meter with 0.1 Milliohm Resolution, Four Wire Measurement and USB Interface
DESCRIPTION:
The AE20218 is a kit for a high precision Resistance (Milliohm) Meter
The AE20128 Milliohm Meter allows for the precise measurement of resistive values, particularly very small ones
from 0.1 milliohm (= 100 microohm or 0.0001 ohm) with 0.1 milliohm resolution
. This can be used to measure current shunts, resistive sensors or PCB traces with high precision. The high resolution makes it possible to locate shorts on a PCB or measure the exact resistance of a jumper/bridge or a short trace.
The four wire measurement (also known as Kelvin sensing) eliminates any influence of the test leads from the measurement results.
The kit contains all necessary parts
, the programmed and tested microcontroller, the high quality, E-Tested PCB with gold finish and a 2x16 LCD with backlight.
No additional parts or components are required!
Yellow-green or blue backlight is selectable at no additional cost. A machined enclosure is also available (see below).
The USB interface allows remote control of the device and the included software to access the readings, log and analyze them. The easy, plain text serial command protocol allows easy integration in own tools and systems.
A comprehensive, printed, 45 pages Assembly and Operation Manual is included (in english, german and english manuals in PDF format also available on the enclosed CD).
The manual covers all the techniques needed including soldering.
All SMD parts are pre-assembled, only through-hole components have to be soldered!
The kit is also suitable for the beginners in electronics.
We provide continuous support before and after you buy. Please contact us if you have any questions. Also if you need a modification or a device custom built to your needs.
OPTIONS:
USB Interface:
The USB option is available for only . It provides an USB 1.1/2.0 interface that allows reading out the values and full software control of all functions. The software is included.
It also allows firmware updates, which will add new features in the future.
Screenshot of the included software.
The plain text data format is fully documented in the included documentation to allow simple integration with external tools and systems.
Display:
Two displays with backlight are available for
no extra charge
yellow-green
(-YG) and
blue
(-BL).
Case Enclosure:
A machined enclosure with all needed cut-outs and labeling is available for .
Size: (WxHxL) 110x60x107mm (4.33"x2.36"x4.21")
Four Wire (Kelvin) Test Clips:
The matching test clips allow measurements on a wide range of components.
Separated leads for the test current and the voltage measurement using Kelvin sensing.
Mains Adapter:
Mains Adapter (220V Euro plug or 120V US plug):
SPECIFICATIONS:
Range:
24 Ohm
240 Ohm
Resolution:
0.1 Milliohm
1 Milliohm
Test Current:
100 mA
10 mA
Display:
240000 Counts
Test Voltage:
<5V
Measuring Technique:
Four Wire Sensing
Functions:
Relative Mode
Measuring Rate:
1 / Second
Display:
2x16 backlit dot matrix LCD
PC Interface:
USB (optional)
Supply Voltage:
8-12V DC, can be used with batteries
See the
Ascel-Electronic eBay Shop
for high quality kits and test equipment!
AE20204 High Precision LC Meter
AE20125 10 MHz Sweep DDS Function Generator
AE20401 5.8 GHz Frequency Counter / RF Power Meter