Clear Laminating Epoxy Resin for Fiberglass UV Resistant NonToxic 3 Gallon Kit

Description

It is a 100% Solid Epoxy with UV Protection additives and Eco-friendly confirms non-yellowing protection for a longer duration.
Hardener is low viscosity formulated cycloaliphatic polyamine. When cured it gives very good gloss, color stability and resistance to various chemicals.
Epoxy Resin is a 100% solids no VOC, primer less, low odor, self-levelling, non-blushing epoxy that provides a sufficient work life, rapid track free time and high adhesion to aggregates and pavements. Each kit includes both pre-proportioned resin (Part A) and hardener (Part B).
It bonds chemically and mechanically to the substrate and can be blend with sand, silica, wood, flower, silica, pebbles and other materials. It is used for boat building and fiberglass fabricating.
Properties
Low Viscous and Low Shrinkage distortion
Excellent adhesion to various substrates
Suitable for elevated Temperature cure
Anti-blushing & Non-yellowing
Suitable for marine applications
Improved Gloss is achieved in coatings
Abrasion & Chemical Resistant
Fast curing with high mechanical stability
Water white clarity is achieved after cure
Contents:
3 Gallon Kit
Mixing Ratio:
2 Part A: 1 Part B by Volume,
100 A to 58 B by Weight.
Typical application properties of PART - A with hardener PART - B
Properties
Components
(A) Resin, (B) Hardener
Mixed Density, lbs./gal. (kg/l)
8.5
Mix Ratio, pbv (pbw)
2/1(100:58)
Color
Clear
Mixed Viscosity, cP 77°F
600-900
Work Time, minutes 100grams
40
Peak Exothermic Temperature 100grams
140°F
Compressive Strength psi
11500
Tensile Strength, psi
7105
Hardness, Shore D
80-85
Flexural Strength psi
11200
VOC g/l
0
* Typical properties. Not to be construed as Specification.
Handling Precautions :
Epoxy resins and Hardeners are chemicals and hygienic procedures should be followed while handling them. Direct contact of resin and hardeners with the skin must be avoided. For more details please refer the material safety data sheet.
Safety Precautions :
Prolonged or repeated exposure may cause eye and skin irritation. If contact occurs, wash immediately and seek medical help. Use safety glasses with side shields and wear protective rubber gloves.
Cleaning and Maintenance of Equipment :
Tools and mixing equipment are best cleaned immediately after use since removal of cured resin is difficult and time consuming. It is recommended that the bulk of the resin be removed using a scrapper and the remainder washed away using solvents such as toluene, xylene or acetone.
Storage
Should be stored in original tightly closed container, in dry and warm conditions.
It is advised not to allow the product to freeze.
Find our more products at simondstore
:
https://www.ebay.com/str/simondstore
If you have any query related to product, request you to message us on ebay.com, it will be our privilege to provide you solution at the earliest & serve you better.
We kindly request you to give us the 100% positive feedback as you will be completely satisfied with the product.
SAFETY INSTRUCTIONS: WEAR SAFETY MASK | WEAR SAFETY GLASSES | WEAR SAFETY GLOVES
Image displayed is for illustrative purpose only. Actual product may vary the displayed image but features and specification would be same or higher as defined above.