Epoxy Resin White Gel Coat Boat Hulls, Casting, Coating, Potting, Fiberglassing

Description

MAX GPE A/B
WHITE
1-Quart of PART A Resin
And
1-Pint PART B Curing Agent
48 Fluid Ounces Combined Volume
MAX GPE WHITE A/B Is An Excellent Resin System For Gel Coatings And Repairs
Bonds Directly To Polyester
Mold Surface Gel Coat
Solid White Casting Resin
Fiberglass Impregnating & Laminating
Please review the instructions before using this product. As with any color coating application, some understanding of painting and coating applications must be observed.
The substrate to be coated must be well prepared prior to applying the MAX GPE A/B WHITE epoxy resins.
PRODUCT DESCRIPTION
MAX GPE WHITE A/B is a two-part epoxy based system specially formulated to provide a solid white opaque color. It offers higher mechanical
performance while maintaining color durability,
gloss
, and other aesthetic qualities.
Upon cure, MAX GPE WHITE A/B demonstrates color opacity, excellent chemical resistance, structural adhesion and overall durability suitable for many protective coatings applications.
MAX GPE WHITE A/B performs well at room temperature use and can withstand cyclic exposure to temperatures from -40°C to 112°C with minimal loss of mechanical performance.
MAX GPE WHITE A/B can be used as an impregnating or fiberglassing resin, tooling and mold gel coats, surface-transfer gel coating, waterproofing coating, or as an opaque white casting resin.
Upon Cure, MAX GPE WHITE A/B resists extreme and repeated thermal shocks making it well suited for bonding substrates with dissimilar expansion coefficients.
MAX GPE WHITE A/B and all of our epoxy formulations are 100% solids and do not contain non-reactive plasticizers or solvent fillers.
Buyer Feedback For MAX GPE A/B WHITE
scottm1004
(
85
)
nice stuff-looks like glass
byanspoon2000
(
349
)
This is a great product and it ships quickly and packed well!
123ingenuity
(
15
)
A hard waterproof glossy white epoxy paint.
kittenheartstiger
(
91
)
Amazing stuff. Waited a while to get it. But worth it. would buy from again(AAAAA+)
THIS KIT INCLUDES A SET OF YORKER CAPS FOR CONTROLLED DISPENSING.
Use these Yorker caps to dispense the material with ease and minimize over pouring and reduce spills.
When done, just replace the tip cap and it will exclude ambient moisture and air and keep the resin system viable for years.
To use the caps, cut off the tip to the desired hole size, and attach. Do not cut pass the
ridge-line
that keeps the tip cap in place.
To dispense, lay the plastic jug unto its side and apply pressure on the bottle to dispense the contents.
When done replace the tip cap and the container is sealed and it will be usable for years.
We highly recommend using a scale to measure each component accurately.
MAX GPE WHITE FOR GEL COAT APPLICATION
Bonds Directly To OEM Polyester Gel Coat
A Clear Coat Similarly Used In Automotive Finishing Is Required As A
UV Protective Top Coat To Prevent Sunlight Damage And Discoloration.
Mixing Procedure
Video will open in a new window
MAX GPE WHITE GEL COAT ROLLER COAT APPLICATION DEMONSTRATION - YouTube
Video will open in a new window
PROPER MIXING PROCEDURE
This mixing procedure is
recommended
for all epoxy resin system to eliminate tacky spots caused by
improper
mixing.
Best Epoxy Resin Mixing Method -Avoid Tacky Spots \u0026 Less Air Bubble - Improve Cure Performance
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
MAX GPE WHITE A/B
Gel Coat Applied For Boats And Marine Vessel
Available In A Larger 1.5-Gallon kit
https://www.ebay.com/itm/222643966152
Customer
Submitted
Videos For MAX GPE WHITE A/B
Boat Hull Gel Coat Application
Episode No. 1 of "Pretty Perfect" - Boat Restoration and  Reconstruction of  a 29 Ft Cabin Cruiser - YouTube
Video will open in a new window
Using the eBay App? Paste link into a browser window:
[isdntekvideo]
Pretty Perfect 6, The Redesign and Reconstruction of 29 Foot Boat - YouTube
[isdntekvideo]
MAX GPE WHITE STRUCTURAL ADHESION TO STEEL PANEL
MAX GPE WHITE A/B
Gel Coat Applied For High-Pressure Hydro-Forming Tooling For Jet Engine Cowling
Tooling Gel Coat
MAX GPE WHITE For Fiberglass Impregnating Structural Panels
MAX GPE WHITE
MDF Plywood Coating
MAX GPE A/B
AVAILABLE COLORS
MAX GPE WHITE A/B 1.5 Gallon Kit
HTTPS://www.ebay.com/itm/222643966152
MAX GPE BLACK A/B 1.5 Gallon Kit
HTTPS://www.ebay.com/itm/222654897945
MAX GPE RED A/B 1.5 Gallon Kit
HTTPS://www.ebay.com/itm/-/311966632307
MAX GPE YELLOW A/B 1.5 Gallon Kit
HTTPS://www.ebay.com/itm/311966571686
MAX GPE BLUE A/B 1.5 Gallon Kit
HTTPS://www.ebay.com/itm/-/222654876571
MAX GPE A/B FOR
ART RESIN
Physical Properties
Viscosity
900-1100 cPs Mixed
Mix Ratio
100 parts A to 50 parts B by weight or volume
Working Time
65 Minutes at 200 Gram Mass
Peak Exotherm
130°C 200 Gran Mass
Time To
Reach
Peak
80 Minutes
Density
1.10 g/cc Cured
Full Cure Time
24 to 36 Hours at 25°C
Heat Cure
2 Hours @ 25°C Plus 1 Hour @ 120°C
Set-To-Dry @ 10 Mil Film
4 Hours
Surface Dry
9 Hours
Handling Time
8 Hours
Mechanical Properties
Test Criteria
Results
Shore Hardness
80 D
Izod Impact
.82 ft-lb/in
Tensile Shear Strength
3,100 psi
Tensile Strength
9,600 psi
Tensile Modulus
400,000 psi
Tensile Elongation
2.1 %
Compressive Strength
4500 psi
Deflection Temperature
84°C
24 Hours Water Weight Gain
0.3%
MIXING AND USAGE APPLICATIONS
THE USE OF A WEIGHING SCALE IS HIGHLY RECOMMENDED TO ENSURE PROPER CURE
Purchase this scale with any of our product offering and the shipping cost of the scale is free.
https://www.ebay.com/itm/222630300203
MAX GPE A/B WHITE is an ultra bright titanium white shade and may require tinting to reduce white color brilliance.
Use our MAX EPOXY PIGMENT PASTE or an oil-based tinting colorant to modify the color to a more eye-pleasing color shade.
Recommended
Tinting Colorants
MAX COLOR PIGMENT CONCENTRATES
These are color concentrates only and must be dispersed in an epoxy resin or PART A component.
The color concentrates are used to blend in with MAX GPE COLORED EPOXY SYSTEM to attain other colors or to intensify color opacity.
MAX COLOR KIT
https://www.ebay.com/itm/
311946633043
Common White Shades Used For Marine Gel Coats Modified With
MAX EPOXY PIGMENT PASTE
****************************************************************
PLEASE CHECK OUT OTHER AVAILABLE
RESIN SYSTEMS AT OUR eBay STORE
For our complete listing, please
Visit our eBay store!
DON'T FORGET OUR EPOXY MIXING KIT
Click The Link To Add To Order
https://www.ebay.com/itm/222623932456
EVERYTHING YOU NEED TO MEASURE, MIX, DISPENSE OR APPLY
Proportioning the correct amount is equally as important to attain the intended cured properties of the resin system.
T
he container in which the epoxy and curing agent is mixed is an important consideration when mixing an epoxy resin system.
It must withstand the tenacity of the chemical and must be free of contamination.
Most epoxy curing agent has a degree of corrosivity, as a general practice, protective gloves should be worn when handling chemicals of the same nature.
MIXING KIT CONTENTS
1 Each Digital Scale -Durable, Accurate Up To 2000.0 Grams
4 Each 32-ounce (1 Quart) Clear HDPE Plastic Mix Cups
4 Each 16-ounce (1 Pint) Clear HDPE Plastic Mix Cups
One Size Fits All Powder-Free Latex Gloves
2 Each Graduated Syringes
Wooden Stir Sticks
Foam Brush
IMPORTANT NOTICE
Your purchase constitutes the acceptance of this disclaimer. Please review before purchasing this product.
The user should thoroughly test any proposed use of this product and independently conclude the satisfactory performance in the application. Likewise, if the manner in which this product is used requires government approval or clearance, the user must obtain said approval.
The information contained herein is based on data believed to be accurate at the time of publication. Data and parameters cited have been obtained through published information, PolymerProducts and  Polymer Composites Inc. laboratories using materials under controlled conditions. Data of this type should not be used for a specification for fabrication and design. It is the user's responsibility to determine this Composites fitness for use.
There is no warranty of merchantability for fitness of use, nor any other express implied warranty. The user's exclusive remedy and the manufacturer's liability are limited to refund of the purchase price or replacement of the product within the agreed warranty period. PolymerProducts and its direct representative will not be liable for incidental or consequential damages of any kind. Determination of the suitability of any kind of information or product for the use contemplated by the user, the manner of that use and whether there is any infringement of patents is the sole liability of the user.