Gemini Valve HD Cycle Brass Ball Valve, Double-Acting Pneumatic Actuator-3/4"

Description

Gemini Valve HD Cycle Brass Ball Valve, Double-Acting Pneumatic Actuator-3/4". Shipped with USPS Priority Mail.
This is
New Old Stock,
It does show shelf wear and some patina.
Valves have been tested to ensure proper operation
Specifications for Valve  87-1-RTR-6-C90BDB (information taken from valve and Gemini Website)
MATERIALS OF CONSTRUCTION
BODY: B16 Brass
BALL: Type 316 Stainless Steel
+    Long-Lasting, Maintenance Free Stem Seal
SEATS: Glass Reinforced P.T.F.E. (Teflon ®)
SEALS: EPR
+   Superior Mounting System -Precise Alignment, Rigid coupling;
In-Line or Cross- Mount
CONNECTION / STYLE SIZES
+   Bubble Tight Closure -
Each Valve Is bubble tested to ensure
Pipe / N.P.T.F. 3/4"
that all sealing points function properly
RATINGS                                                                                 +   Compact, Lightweight Hard Anodized Aluminum
TEMPERATURE:                                                                          Actuator with Stainless Steel Trim
P.T.F.E. with EPR / EPDM: -20° F to 180° F
PRESSURE:
1,000 p.s.i. C.W.P. (100°F) - Limited Duty
700 p.s.i. C.W.P. - Full Duty
The valve is operated by a double-acting pneumatic actuator which operates on 60 - 125 psi air.  The actuator features a lightweight aluminum body with hard anodized surfaces for excellent corrosion resistance. Actuators are permanently lubricated so that a lubricated air supply is not necessary. The actuator has two 1/8” NPT air port connections for remote piloting or optional NAMUR interface for direct pilot valve mounting. Tubing: For short runs up to 5 feet 5/32” I.D. is suitable, 1/4” I.D. will serve up to 30 feet. For longer runs, use 3/8” I.D. or larger. ( I have always used 3/8" air line regardless of run length)Pneumatic Actuators are designed to operate in ambient temperatures between -20° F (-28.0° C) and +350° F (+175° C). Care must be taken to assure that the moisture content of the air supply is sufficiently low to prevent icing within the actuator.
Picture is of one of the available stock. You will receive identical item but may not be one pictured.