Roklin's FlexSet Concrete Repair, 3-Gal Kit, Crack Spall Pothole Patch Repair

Description

CONCRETE REPAIRS MADE SIMPLE!
(1) 3-Gal Kit of Roklin FlexSet Concrete Repair
In temperatures below 58°, add 1-ounce bottle of catalyst  to your order. This will cause FlexSet to set up faster in cold weather.
FREE SHIPPING to the Lower 48!
Originally developed as a rapid runway concrete repair system for the military,
FlexSet
has become a cost-effective alternative to traditional spall repair, driveway concrete repair, floor repair and other concrete restoration procedures.
The Roklin difference with Flexset Concrete Repair is that it utilizes a naturally rounded sand, which is polymer coated in our plant. This type of aggregate greatly enhances flow ability and increases the overall strength of the crack repair.
Available for purchase in three- and five-gallon kits, FlexSet concrete repair kits contain pre-measured amounts of polyurethane and aggregate in each container. The 3-gallon kit will deliver 0.2 cubic feet which will cover approximately 20 square feet at a thickness of 1/8″. For deeper repairs add 12 lbs. of our specially-coated BlackRok
aggregate and mix well. This will increase your coverage to 0.3 cubic feet.
"I need a product to handle crack repairs, spalling, and particularly bridge decks and approaches where different rates of flexibility are a problem. I've tried all the alternatives but nothing works like this. It's really amazing — I've never had a single failure, and I started using it on an R&D basis since 1988. You can expect 10 years of life from your repairs with the Roklin system."
Paul Von Norman
Caltrans Maintenance Supervisor
Escondido, CA
Each 5-gallon kit of FlexSet will
deliver 0.4 cubic feet which will cover approximately 50 square feet at a thickness of 1/8"
.
FlexSet Crack Repair components can be mixed in the bucket it comes in with a hand drill, or in our low cost Motor Mix Machine. The material has a 6-8 minute working time at 75ºF.
Advantages of FlexSet vs. conventional materials:
Minimal preparation required
No costly demolition necessary
Set-up in less than 10 minutes
Odorless & vaporless
Exceptional bond to concrete
Unaffected by extreme heat or cold
Seals & waterproofs
Good chemical resistance to oils, fuels, and antifreeze
Outstanding durability
High-traction surface
"The Roklin Team repaired a badly cracked and broken section of taxi-way to our hangers... the alternative was a very expensive replacement of the concrete, but the Roklin product cleaned up the damage beautifully."
Stephen Ricker
Caltrans Maintenance Supervisor
Escondido, CA
How To:
Roklin Systems, Inc., introduces
Flexset
, the 30-minute concrete spall repair. With no saw-cut or demolition required, prep is quick and easy, usually just blown air. Damaged areas can be returned to traffic in a fraction of the time required for traditional repair methods. The polymer-based repair works in areas where there is a lot of movement, damaged base or where other concrete repairs materials have failed.
Concrete repairs can be completed using FlexSet Concrete Repair in minutes with a few simple steps. There is no need for saw cutting or use of a primer.
The resulting repair can be put back into service in as little as 30 minutes.
Where To Use Roklin's FlexSet:
Roads and highways
Streets and sidewalks
Driveways and parking lots
Highway shoulders
Bridges and loading docks
Ramps and slabs
Floors and decks
Foundations and bases
Playgrounds
Concrete Repair Applications
Concrete Spall Repair
Concrete Crack Repair
Concrete Bridge Repair
Concrete Slab Repair
"I used the Roklin products to repair the cracked and chipped areas of concrete at the entrance to our Home Office building. The job was done quickly and simply — this stuff really works!"
Carl Cartwight
General Manager, Facilities Maintenance
Wal*Mart Stores, Inc.
The Advantages/Benefits of Roklin Urethane Polymer Based Repair Products
Minimal Preparation
With most conventional repair materials there considerable time and labor involved with dig-out and haul-away prior to installation. Roklin products require only that you blow out, or vacuum the damaged area to remove loose rock, dust, and dirt. You don’t need saw cuts or primers, but it is important to remove any moisture from the application area. It is rare to spend more than 5-10 minutes for preparation.
Simple Installation
There is no need for heavy equipment or extensive worker training to apply Roklin materials. FlexSet and FloMix come in pre-measured, pre-weighed kits containing the exact amount to be mixed. They can be mixed with a bird cage mixer and a drill, or our Motor Mix Machine.
Lower Labor Costs
Most applications can be done by a two man crew. In many instances two men can set up the road closure and do the installation. Most installations will be completed in less than an hour from start to finish, so that repair productivity is at a high level.
Quick Setting
Roklin products usually set up within 12-15 minutes at 75°F. The repaired area can be put back into service, and will support high load traffic within 45 minutes to an hour. This allows for short closures and traffic delays, less exposure of workers to traffic, and contributes to lower cost overall.
Safe to Use
As mentioned before, Roklin products have been used in thousands of installations over the last 20 years without incident. The materials contain no solvents or VOC’S, and have exhibited exposure levels substantially below OSHA limits in outdoor tests.
Seals and Waterproofs
As opposed to many conventional repair materials, Roklin polyurethane repairs are completely impervious to water and effectively seal the pavement so the water cannot reach the sub-base to cause erosion, corrosion of rebar, or further deterioration.
Long Lasting/ Durable
Due to the high strength properties and excellent adhesion of Roklin products to the substrate, our repairs last considerably longer than conventional materials. We have installations that have been in place for over 10 years in some very high traffic, heavy load bearing freeways in California.
Unaffected by Heat or Cold
Not only can Roklin products be applied over a wide temperature range (-10°F to 140°F), they are not affected by extreme temperatures once they are in place. There is minimal expansion/contraction of the polymer/aggregate mix once the material is fully cured.
Good Chemical Resistance to Oils, Hydraulic Fluids and Diesel and Gasoline
Our materials have been tested and show no deterioration or loss of physical properties when exposed to these chemicals that are commonly found on roadways and parking areas, etc.
Enhances Smooth Ride
All Roklin products are self-leveling, and can be easily be feathered into the surrounding substrate to restore the original grade level to mismatched slabs or sunken areas.
Effective Load Transfer
Because of the flexural properties, repairs done with Roklin products effectively transfer repeated impact loads between concrete freeway slabs. The rigidity of concrete under repeated impact load is one of the primary causes of corner spalling in roadway slabs.
Reduces Tort Liability
The capability of Roklin products to immediately repair hazardous conditions that may appear without warning can greatly reduce the possibility of lawsuits, justified or not, which could cost thousands of dollars.
Overall Cost Effectiveness
Even though Roklin products are sometimes more expensive than conventional materials initially, the advantages listed above can actually save a significant amount of money in the long run. An example of cost savings is a recent job that was done by Cal-Trans in Valencia. Typically, replacement cost for concrete freeway slabs is in excess of 00 per slab, depending on the number of slabs replaced at one time. In Valencia, Roklin products were used to stabilize the base and repair 10 freeway slabs on I-5, in two hours of closure time, at a total cost of less than 00.