WOREMOR Interior Grounding Kit for EMF Shielding Paint

Description

An all in one Grounding kit for interior shielding paint. Applicable for up to 2 walls depending on dimensions.
Contents:
1x EB2 Grounding Strap
1x GW Grounding Plate
1x GC-200 Grounding Cable
GW Grounding Plate:
Grounding plate for shielding paints, nettings, fleeces, etc. for interior use. Quadratic design for mounting next to an electrical outlet.
To achieve the maximum effectiveness from shielding paint, it is strongly recommended to have one grounding set per each connected area - room.
Scope of delivery: Grounding plate 75 x 75 x 6 mm, covering cap 80 x 80 x 8 mm, 4 screws, 4 dowels, 3 solder plugs;
EB2 Grounding Strap:
The glue on EB2 is electrically non-conductive, therefore EB2 can be sticked only under the materials. With a new glue, EB2 sticks with a 10 N/cm very well even on difficult undergrounds.
Self-adhesive
With electrically non-conductive glue
Attenuation: 80 dB at 1 GHz
Adhesive force 10 N/cm
Width 2 cm, length 10 m, thickness 0.2 mm
Grounding Cable GC 200:
Grounding cables to connect our grounding components. With soldered 4 mm gold plugs on both sides. This cables provide a protection against unplugging together with the cover caps.
Scope of delivery: Cable 2.5 mm² transparent, highly flexible; Length 2 meters.